Carbon Fibre Angle, 90deg 1.8mm 100mm x 25mm x 1800mm - Double Gloss

Product Description

Cross-section dimensions: 23x23mm (1.46mm thick) Material: 2x2 twill pre-preg Carbon Fibre Autoclave cured for best properties and surface finish.
Can be used as lightweight stiffeners, corners for joining flat sheet or frame members in a variety of applications.
Cutting of these angles is best achieved through the use of a 'Dremel' or grit/diamond tipped cutter with a high rotational speed. Supplied with one side rough and one side shiny to provide a bonding surface and a cosmetic surface. ReVerie recommends the use of Scotchweld DP490 for bonding. (ReVerie Part No: R01SO6208)